Shop Now at 1AAuto! http://1aau.to/m/Visit-1A-Auto
If you’ve noticed a clunky feel or noise in your steering wheel lately, it’s good to check out sooner rather than later. In this video, Len shows you how to check out the joints in your steering column, to find out if they are binding, or loose and clunky!
Check out our other fantastic diagnostic videos here:
For More Info visit us at http://1aau.to/h/ciR/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
source
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Great video! I’m not mechanically minded but you have a new subscriber here.
I started thinking what’s the next thing that goes if you don’t fix this right as he answered that question and apparently what goes is you off the road😂
"Veericle" but thank you. This is quite informative.
Same issue with an old 90's VW Jetta. Told the guy to replace the whole unit if he can still find it …. rather not drive long distance or high speed. If that U – joint snaps off u dont have control of the steering and might smash into oncoming traffic
My car been doing this for a year. How has it not broke
Woah 1A is climbing the u tube entertainment ladder, great!
My car just started doing this.. 😢 is been making a noise off and on like this if I go over too many bumps after I had an outer tierod go and had it fixed …
“Listen closely for the sound it makes,” he says. Then someone begins playing music in the background.
Seriously?
Man my truck is making an awful noise I just cant tell if its the cv axel or my ujoints
My 2012 mitsubishi rvr doesn't start with push button n says immobilizer service repair required. Towed to mitsubishi dealership to check. They said everything shows OK except steering column not sending computer signals n need to be replaced with brand new one cost around 3000.
Is there any possibility of repairing.
Replaced an used one. But couldn't programme
I don't know why byt everythime one of my cars has a problem I get here.
Mine does it whens its stationery only, would it most likely be the same problem? I don't get any sound when turning the wheel while driving, been like this for about a week now.
Is it safe to drive when a steering column bearing is going out?
That's what going on with my AE80😤 need a new one but it's lil bit hard to get it
My steering is really hard to turn and i replaced the power steering pump….could this prevent my steering from turning ?
Thanks man
I have the exact problem, anyone know if these are known to break? I don't want to replace mine unless there is risk of death/severe injury.
My Tucson is 6 years old with only 65,000km. The Hyundai dealer told me I need to replace the steering shaft due to wear and tear. Is it normal to replace steering shafts after only 6 years?
Thanks very much for this great video..,l need the same part for my 2013 Elantra GL sedan 4 doors…,can please tell me which part to buy …. Thanks
I drive a 2008 Toyota Yaris, when i speed up in the highway, the entire car and steering wheel vibrates🙈 but when I slow down,it drives smooth again. But soon as I begin to speed up,it will vibrate extensively again.
Any ideas what the problem could be?
Great video Thanks!
On my 2015 Nissan murano sl 115k miles when I'm going straight I hear a low clunk noise on driver side front end.
If I turn the wheel to the left / counter clockwise the clunk noise goes away.. Just curious your thoughts?
Thanks.
Yes I have a bad one too but my problem is I have a 2003 Mitsubishi Galant and I can't find one anywhere 😳
diagnosed 10 seconds into the video 💀
Apparently, on some cars, let's say the volvo had it because of a bolt (what??? How???)
Video: https://youtu.be/5A–qkKscZA
It exists as one of the top mysteries in the world to me
My malibu doing this for a while now. Scared to drive it. Replaced struts because I was told that was probably it. Still makes this sound. And lots of play in the wheel. This will be my next project, I hope it fixes the issues.
This what mines does and I learn hands on so I been fixing my car my self
I got all the tools I need now.
Being a handy mechanic is good.
Wish I learned it earlier in my teens
One of the most things used in the entire world now are cars
I’ve got a 2008 ford van and it has a smallest slight clunk when I go over bumps or pot holes. Could this be the same issue
I wish this gentleman was my teacher when I went to school for auto tech. Good info man!
Thank you so much
Hello I just replace my steering shaft on my 2006 Malibu I replace the same way because I had my steering wheel wrap with the seatbelt
Anyway my steering wheel is off center now do I need alignment
I have an 03 Dakota. New steering shaft fixed it perfectly
Excellent love it thanks
Dr. Romano
Would this cause vibration in the steering wheel
I have this noise🤯thanks for the vid!
My noise sounds just like that. I don't even have to move at all just turn the wheel all the qay
Mine was a outer tie rod
I changed the shaft and with the truck off there a lil slack In the wheel and it makes a noise at the u joint knuckle where the upper connect to the steering wheel ut its brand new so why does it make a noise is it normal since its a connection and its moving? I'm sorry not good at this kind of stuff
I’ve got a 2014 Ford Raptor , when I turn the steering wheel to the left only to the left there is a binding grinding noise felt inside the steering wheel . It happens at stop or slow speed or when at angle upwards